LSRA24 CR

LSRA24 CR
LSRA24 CR

Shaft Support, Continuous Support Assembly, Corrosion Resistant, Profil bas, Pré-percé (PD), Classe L, Zinc Plated Steel Rail and 440C Shaft, Découpe à la longueur (CTL), 178 in Long, Utiliser avec 1.5 in Nominal Diameter Open Bushing Bearings

Lead Time:  Contact Factory  

  • Shaft supports simplify mounting of Thomson 60 Case shafts. Users of Thomson 60 Case shafting should consider the use of these shaft supports
  • These supports can be used horizontally or vertically.
  • Low Shaft Rails allow the design of more compact linear motion systems
  • Class L Shaft included
  • Y1=Y2 is standard. Special Y1 can be specified by customer.
  • Bolt down from top
  • Consists of zinc plated steel rail and 440C stainless steel LinearRace shafting (HRC 50 min.).
  • LSRAs do not use standard “PD” shafting. The shafting uses a different hole pattern and configuration
  • Use only with Super Smart Ball bushing bearings.

Dimensions

dimensions
DimensionValeur
[A]0.93 in
[A1]0.465 in
[A2]0.69 in
[d] Arbre, diamètre nominal1.5 in
[H]1.375 in
[H] Tolérance± 0.002 in 
[H1]0.7 in
[N]0.390 thru, 0.601 Dia C-Bore x 0.580 Deep 
[X] Dim.4 in
[Y]1 in
Boulon recommandé3/8 
Longueur178 in 

Caractéristiques

CaractéristiquesValeur
ClasseClasse L 
Material, ShaftStainless Steel 440C 
Material, SupportSteel, Zinc Plated 
MatériauZinc Plated Steel Rail and 440C Shaft 
Option Predrilled (PD)Pré-percé (PD) 
Support StyleProfil bas 
Weight7.69 lb/ft

Obtenir un devis

* Veuillez remplir le formulaire ci-dessous afin que nous puissions mieux vous aider :

Would you like to receive periodic Thomson email updates including application stories, online training opportunities, new product information and links to online design tools?